Category Archives: Raspberry Pi

Raspberry Pi and TFT Display

The 1.8″ TFT from Adafruit is the perfect display to attached to a Raspberry Pi.

These instructions also help with the Sainsmart display and you can find more info for both here: http://www.whence.com/rpi/

 

 

The TFT isn’t ‘plug & play’ with the Raspberry, a patch has to be applied to the kernel to be able to interface via SPI with the ST7735R controller chip on the TFT. Once working, the display will act as a framebuffer device.

I spent two weeks trying to get it working, so I thought I would document it to help others.

PiScreen TFT Raspberry Pi


###UPDATE 14th Nov 2013###
After a large number of request, I have now posted the compiled version of the kernel that supports the 1.8” TFT. Based on 2013-09-25-wheezy-raspbian.img. There are two links below, one for the Kernel the other is the instructions.

http://ozzmaker.com/downloads/1.8TFT_Kernel_3.6.11.tar

 

http://ozzmaker.com/download/README1.8TFT_Kernel_3.6.11.tar.txt

 

Mirror

 

Thanks go to Kamal (http://www.whence.com/rpi/) and Neil for responding to my emails & forum post, and their work on the ST7735R driver.
Thanks also go to Adafruit for their cool products.

 

As it takes over three hours to compile the kernel on the PI, I will show how to cross compile from another Linux PC. In my case, it is Ubuntu 12.10 running within VMWare on a Windows 7 Quad core PC. Kernel compile time is 15 mins.

 

Wire it up




Sainsmart wiring details are here on Kamal’s page: http://www.whence.com/rpi/


You could also use a shield to make the wiring a lot easier, look here

Prepare the Raspberry Pi

-Download and install Raspbian “wheezy”.
This guide is based on 2013-02-09-wheezy-raspbian which is running 3.6.11 kernel

Continue reading Raspberry Pi and TFT Display