Home › Forums › Forums › General discussion › Configuration Rapsberry Nano / BerryGPS IMU 3 / SIM800X GSM/GPRS › Reply To: Configuration Rapsberry Nano / BerryGPS IMU 3 / SIM800X GSM/GPRS
December 27, 2019 at 11:11 am #13386
Mark Williams
Keymaster
Hi
My suspicion is that it will not work.
I am not familiar with the WaveShare GSM hat.. But it looks like it uses the RX/TX pins of the Pi. These pins are also used buy the BerryGPS-IMU.
If you need, GPS, GSM and IMU.. you can do it using BerryGPS-GSM and then add a BerryIMU.
You can access the GPS using TX/RX pins and the GSM module can be access using USB.
BerryGPS-GSM;
Mark --OzzMaker.com --
