Reply To: GPS not getting Fix beyond Mode=1

Home Forums Forums Technical Support for BerryGPS-GSM GPS not getting Fix beyond Mode=1 Reply To: GPS not getting Fix beyond Mode=1

#15968
nanunanu
Participant

OK.  Disconnected from GPIO and running on UPS Only.  Before changing boot/config.txt it is still not getting a fix after a few minutes.

Setup:

at
OK
AT+UGRMC=1
OK
AT+UGGLL=1
OK
AT+UGGSV=1
OK
AT+UGGGA=1
OK
AT+UGIND=1
OK
AT+UGPRF=1
OK
AT+UGPS=1,1,67
OK

+UUGIND: 0,67

+UUGIND: 1,0

Here are the raw NMEA strings.
$GNRMC,140809.00,V,,,,,,,280620,,,N*69
$GNGGA,140809.00,,,,,0,00,99.99,,,,,,*7C
$GPGSV,4,1,14,01,60,117,,03,00,137,,07,52,188,,08,28,055,*7C
$GPGSV,4,2,14,11,54,059,,13,15,298,,15,00,321,,17,27,248,*7B
$GPGSV,4,3,14,19,05,241,,22,09,118,,28,44,308,,30,65,254,*72
$GPGSV,4,4,14,46,19,245,,51,34,224,*72
$GLGSV,2,1,07,77,29,134,,78,81,075,,79,37,326,,81,50,219,*63
$GLGSV,2,2,07,82,02,216,,87,30,032,,88,72,030,*54
$GNGLL,,,,,140809.00,V,N*50
$GNRMC,140810.00,V,,,,,,,280620,,,N*61
$GNGGA,140810.00,,,,,0,00,99.99,,,,,,*74
$GPGSV,4,1,14,01,60,117,,03,00,137,,07,52,188,,08,28,055,*7C
$GPGSV,4,2,14,11,54,059,,13,15,298,,15,00,321,,17,27,248,*7B
$GPGSV,4,3,14,19,05,241,,22,09,118,,28,44,308,,30,65,254,*72
$GPGSV,4,4,14,46,19,245,,51,34,224,*72
$GLGSV,2,1,07,77,29,134,,78,81,075,,79,37,326,,81,50,219,*63
$GLGSV,2,2,07,82,02,216,,87,30,032,,88,72,030,*54
$GNGLL,,,,,140810.00,V,N*58

Changed bootconfig adding the max current param and repeated procedure.  Still no fix.  The other unit is sitting next to it by the window with a 3D fix.

I am going to move it over to a different Pi Zero to see what I get.  Will post results momentarily.

 

 

Blip, blop, bloop...