Reply To: [Resloved]Touchscreen does not work with Pre-configured Image

Home Forums Forums Technical Support for PiScreen [Resloved]Touchscreen does not work with Pre-configured Image Reply To: [Resloved]Touchscreen does not work with Pre-configured Image

#2826
Damon1974
Participant

For the Dmesg request:
http://pastebin.com/y3nMisjv

For CAT /etc/modules request:
http://pastebin.com/dj9T5gTG

For the cat /proc/bus/input/devices request:
http://pastebin.com/a9HC4ERh

++ sudo sh -c ‘echo “sudo /bin/sh /etc/X11/Xsession.d/xinput_calibrator_pointercal.sh” >> /etc/xdg/lxsession/LXDE/autostart’ ERROR
http://pastebin.com/8fmFDZ5Q

++ ** ls -l /dev/input/event* + cat /proc/bus/input/devices **
I have nothing else plugged in. I am using SSH to access the device. The screen does not accept touch screen response, and can't calibrate either. I can't test calibration from the console because the sudo command does not work. Probably due to not recognizing the touch screen capabilities at all.

The image you had me download is exactly the same as I was using last night. I restored your image and tested again with the same results. The results I provided tonight are with the new image you had me download.

Let me know what other information I can provide. Thanks.

- Damon Downing
me@damon1974.com

Blip, blop, bloop...