Reply To: [Resloved]Touchscreen does not work with Pre-configured Image

Home Forums Forums Technical Support for PiScreen [Resloved]Touchscreen does not work with Pre-configured Image Reply To: [Resloved]Touchscreen does not work with Pre-configured Image

#2835
Mark Williams
Keymaster

I tested it
sudo sh -c ‘echo “sudo /bin/sh /etc/X11/Xsession.d/xinput_calibrator_pointercal.sh” >> /etc/xdg/lxsession/LXDE/autostart’
and it works.
You need to make sure that after you paste it in, you change the commas back to inverted commas.

In saying that, if you have downloaded the image then this would already be configured.

Does the calibration screen that runs before X windows work?

What about Evtest, do you get any feedback? You can run it with;
evtest /dev/input/event0
If it isnnt installed, you can install it with;
sudo apt-get install evtest

Mark --OzzMaker.com --

Blip, blop, bloop...