Yep, it doesn’t even look like the display driver is being loaded.
what is the output of cat /etc/modules ?
You can also test by manually loading the drivers;
pi@raspberrypi ~ $ sudo modprobe flexfb width=320 height=480 regwidth=16 init=-1,0xb0,0x0,-1,0×11,-2,250,-1,0x3A,0x55,-1,0×36,0x28,-1,0xC2,0x44,-1,0xC5,0x00,0x00,0x0,0x0,-1,0xE0,0x0F,0x1F,0x1C,0x0C,0x0F,0x08,0x48,0x98,0x37,0x0A,0x13,0x04,0x11,0x0D,0x00,-1,0xE1,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0xE2,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0×11,-1,0X29,-3
pi@raspberrypi ~ $ sudo modprobe fbtft_device debug=3 rotate=90 name=flexfb speed=16000000 gpios=reset:25,dc:24,led:22
pi@raspberrypi ~ $ sudo modprobe ads7846_device gpio_pendown=17 verbose=3 x_plate_ohms=100 pressure_max=255 swap_xy=1
Mark --OzzMaker.com --
