Reply To: [Resolved]XRDP and Vino-server disabled the PiScreen

Home Forums Forums Technical Support for PiScreen [Resolved]XRDP and Vino-server disabled the PiScreen Reply To: [Resolved]XRDP and Vino-server disabled the PiScreen

#3080
JanKinander
Participant

This is the output of "cat /etc/modules"

pi@raspberrypi ~ $ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Parameters can be specified after the module name.

snd-bcm2835
flexfb width=320 height=480 regwidth=16 init=-1,0xb0,0x0,-1,0x11,-2,250,-1,0x3A,0x55,-1,0x36,0x28,-1,0xC2,0x44,-1,0xC5,0x00,0x00,0x0,0x0,-1,0xE0,0x0F,0x1F,0x1C,0x0C,0x0F,0x08,0x48,0x98,0x37,0x0A,0x13,0x04,0x11,0x0D,0x00,-1,0xE1,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0xE2,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0x11,-1,0X29,-3
fbtft_device debug=3 rotate=90 name=flexfb speed=24000000 gpios=reset:25,dc:24,led:22
ads7846_device gpio_pendown=17 verbose=3 x_plate_ohms=100 pressure_max=255 swap_xy=1
pi@raspberrypi ~ $

and if I load the driver manually I get this message:

pi@raspberrypi ~ $ sudo modprobe flexfb width=320 height=480 regwidth=16 init=-1,0xb0,0x0,-1,0×11,-2,250,-1,0x3A,0x55,-1,0×36,0x28,-1,0xC2,0x44,-1,0xC5,0x00,0x00,0x0,0x0,-1,0xE0,0x0F,0x1F,0x1C,0x0C,0x0F,0x08,0x48,0x98,0x37,0x0A,0x13,0x04,0x11,0x0D,0x00,-1,0xE1,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0xE2,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0×11,-1,0X29,-3
FATAL: Module flexfb not found.

So I ran this line and rebooted "sudo REPO_URI=https://github.com/notro/rpi-firmware rpi-update"
That did the trick, somehow the drivers were uninstalled.

Blip, blop, bloop...