Reply To: Raspberry pi 2 support

[locusf]

I get this message in my dmesg:

[    3.491878] fbtft_device:  SPI devices registered:
[    3.491908] fbtft_device:  'fb' Platform devices registered:
[    3.491954] fbtft_device:      bcm2708_fb id=-1 pdata? no
[    3.492008] fbtft_device:  spi_busnum_to_master(0) returned NULL
[    3.498882] fbtft_device: failed to register SPI device
[    3.554198] 
ads7846_device: ads7846_device_init()
[    3.554230] ads7846_device: SPI devices registered:
[    3.554244] ads7846_device:
[    3.554256] ads7846_device: Settings:
[    3.554268] ads7846_device:   model = 7846
[    3.554279] ads7846_device:   gpio_pendown = 17
[    3.554289] ads7846_device:   swap_xy = 1
[    3.554299] ads7846_device:   x_min = 0
[    3.554309] ads7846_device:   x_max = 4095
[    3.554319] ads7846_device:   y_min = 0
[    3.554329] ads7846_device:   y_max = 4095
[    3.554339] ads7846_device:   x_plate_ohms = 100
[    3.554349] ads7846_device:   pressure_min = 0
[    3.554360] ads7846_device:   pressure_max = 255
[    3.554370] ads7846_device:   keep_vref_on = 1
[    3.554380] ads7846_device:   vref_delay_usecs = 0
[    3.554390] ads7846_device:   vref_mv = 0
[    3.554400] ads7846_device:   settle_delay_usecs = 0
[    3.554410] ads7846_device:   penirq_recheck_delay_usecs = 0
[    3.554420] ads7846_device:   y_plate_ohms = 0
[    3.554430] ads7846_device:   debounce_max = 0
[    3.554440] ads7846_device:   debounce_tol = 0
[    3.554450] ads7846_device:   debounce_rep = 0
[    3.554463] ads7846_device: spi_busnum_to_master(0) returned NULL.
[    3.624356] fbtft_device:  SPI devices registered:
[    3.624386] fbtft_device:  'fb' Platform devices registered:
[    3.624425] fbtft_device:      bcm2708_fb id=-1 pdata? no
[    3.624472] fbtft_device:  spi_busnum_to_master(0) returned NULL
[    3.631414] fbtft_device: failed to register SPI device
[    3.681188] 
ads7846_device: ads7846_device_init()
[    3.681256] ads7846_device: SPI devices registered:
[    3.681279] ads7846_device:
[    3.681309] ads7846_device: Settings:
[    3.681333] ads7846_device:   model = 7846
[    3.681350] ads7846_device:   gpio_pendown = 17
[    3.681364] ads7846_device:   swap_xy = 1
[    3.681375] ads7846_device:   x_min = 0
[    3.681385] ads7846_device:   x_max = 4095
[    3.681408] ads7846_device:   y_min = 0
[    3.681436] ads7846_device:   y_max = 4095
[    3.681457] ads7846_device:   x_plate_ohms = 100
[    3.681484] ads7846_device:   pressure_min = 0
[    3.681508] ads7846_device:   pressure_max = 255
[    3.681521] ads7846_device:   keep_vref_on = 1
[    3.681531] ads7846_device:   vref_delay_usecs = 0
[    3.681542] ads7846_device:   vref_mv = 0
[    3.681552] ads7846_device:   settle_delay_usecs = 0
[    3.681563] ads7846_device:   penirq_recheck_delay_usecs = 0
[    3.682141] ads7846_device:   y_plate_ohms = 0
[    3.682169] ads7846_device:   debounce_max = 0
[    3.682182] ads7846_device:   debounce_tol = 0
[    3.682193] ads7846_device:   debounce_rep = 0
[    3.682211] ads7846_device: spi_busnum_to_master(0) returned NULL.