Reply To: [Resolved]piscreen does not work

Home Forums Forums Technical Support for PiScreen [Resolved]piscreen does not work Reply To: [Resolved]piscreen does not work

#4049
shannon
Participant

the last part of /boot/config.txt:

# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4

# uncomment for composite PAL
#sdtv_mode=2

#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800

# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on

# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi

# Additional overlays and parameters are documented /boot/overlays/README

dtparam=spi=on
dtoverlay=piscreen,speed=8000000,rotate=90

Blip, blop, bloop...