Reply To: [Resolved]piscreen does not work

[Mark Williams]

The driver has been updated to use the functionality of device overlays, more information here;
https://www.raspberrypi.org/documentation/configuration/device-tree.md

If you would like to use the old method,
Remove dtoverlay=piscreen,speed=8000000,rotate=90 from /boot/config.txt.
Keep dtparam=spi=on to use the old method
The add the below to /etc/modules

flexfb width=320 height=480 regwidth=16 init=-1,0xb0,0x0,-1,0x11,-2,250,-1,0x3A,0x55,-1,0x36,0x28,-1,0xC2,0x44,-1,0xC5,0x00,0x00,0x0,0x0,-1,0xE0,0x0F,0x1F,0x1C,0x0C,0x0F,0x08,0x48,0x98,0x37,0x0A,0x13,0x04,0x11,0x0D,0x00,-1,0xE1,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0xE2,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0x11,-1,0X29,-3
fbtft_device debug=3 rotate=90 name=flexfb speed=16000000 gpios=reset:25,dc:24,led:22

The touchscreen is no longer supported in the old method

Mark --OzzMaker.com --