Reply To: Mounting with a 3.5" RPi Display

Home Forums Forums Technical Support for BerryGPS and BerryGPS-IMU Mounting with a 3.5" RPi Display Reply To: Mounting with a 3.5" RPi Display

#6897
Mark Williams
Keymaster

In the image above, the pins you can use are highlighted in the red square. You can solder some pin headers to these and then use jumper cables to connect it to your Raspberry Pi.  There is a description just below the pins of what pin is what.

 

Mark --OzzMaker.com --

Blip, blop, bloop…