hi,
I am having the same problem and tested the minicom with no characters on the screen. I’ve placed the device outside to get a lock but I am having issues with pi locking up. I monitored the temperature of the pi prior to it locking up and it is sitting about about 30c. I also placed an amp meter in the power circuit to make sure the power draw was not too much and it is running at about 1.8amps coming off of a 3s battery.
I also tried two different boards with raspian stretch and jessie. Unfortunately both boards are only unstable when connected.
Any recommendations would be appreciated. Below is the output from gpsmon
tcp://localhost:2947 JSON slave driver>
(115) {“class”:”VERSION”,”release”:”3.11″,”rev”:”3.11-3″,”proto_major”:3,”proto_
minor”:9,”remote”:”tcp://localhost:2947″}
(122) {“class”:”DEVICES”,”devices”:[{“class”:”DEVICE”,”path”:”tcp://localhost:29
47#/dev/tty0″}],”remote”:”tcp://localhost:2947″}
(154) {“class”:”WATCH”,”enable”:true,”json”:false,”nmea”:false,”raw”:2,”scaled”:
false,”timing”:false,”split24″:false,”pps”:true,”remote”:”tcp://localhost:2947″}
CGPS
:9{“class”:”WATCH”,”enable”:true,”json”:true,”nmea”:false,”raw”:0,”scaled”:false,”false,”raw”:0,”scaled”:false,”timing”:false,”split24″:false,”pps”:false}{“class”:”WATCH”,”enable”:true,”json”:true,”nmea”:false,”raw”:0,”scaled”:false,”timing”:false,”split24″:false,”pps”:false}
Thank you.