Home › Forums › Forums › Technical Support for BerryGPS and BerryGPS-IMU › Unknown device> JSON slave driver requires 80 › Reply To: Unknown device> JSON slave driver requires 80
May 21, 2018 at 12:55 am #7304
TJ
Participant
Two things:
- The “requires 80” in the original error message appears to be due to my terminal window size (it was set to 75X20) so it was not echoing error messages to the screen. When I used the gpsmon /dev/serial0 I got a few more characters that allowed me to figure that out. Still doesn’t work, but now with a window size change it is a bit more verbose:
- Below is the result of the command you suggested:
:~ $ gpsmon /dev/serial0
gpsmon:ERROR: device open of /dev/serial0 failed: Device or resource busy – retrying read-only
gpsmon:ERROR: read-only device open of /dev/serial0 failed: Device or resource busy
Hopefully this helps? Thanks for taking the time to troubleshoot with me. Being in the US, I’m afraid the time difference might make response times a bit delayed, but I do appreciate your efforts.