Home › Forums › Forums › Technical Support for BerryGPS and BerryGPS-IMU › Berry GPS-IMU not shown in i2c › Reply To: Berry GPS-IMU not shown in i2c
June 20, 2018 at 11:25 am #7413
PeterP
Participant
The LEDs will only come on once there is a GPS fix.
Can you follow this guide up until you reach this command cat /dev/serial0
https://ozzmaker.com/berrygps-setup-guide-raspberry-pi/
Let me know if you see any information from the GPS
Peter --OzzMaker.com --
