ozzmaker.com

Search
Skip to content
  • About
  • Shop
  • Forums
  •  

Screen-Shot-2018-06-20-at-10.07.04-AM

June 21, 2018 1172 × 974 Reply To: Berry GPS-IMU not shown in i2c

Blip, blop, bloop...

  • BerryIMU
    • BerryIMU Quick Start Guide
    • Guide to interfacing a Gyro and Accelerometer with a Raspberry Pi
    • Create a Digital Compass with the Raspberry Pi - Part 1 - "The Basics"
    • Create a Digital Compass with the Raspberry Pi - Part 2 - "Tilt Compensation"
    • Create a Digital Compass with the Raspberry Pi – Part 3 – “Calibration”
    • Digital Compass with the Raspberry Pi - Part 4- "Smartphone Replica"
    • How to Create an Inclinometer using a Raspberry Pi and an IMU
    • Guide to interfacing a Gyro and Accelerometer with a Raspberry Pi – Kalman Filter
    • Converting values from an Accelerometer to Gs
    • Double tap detection with BerryIMUv3
    • Connecting BerryIMUv3 via SPI to a Raspberry Pi
  • BerryGPS-IMU
    • BerryGPS-IMU Quick Start Guide
    • BerryGPS setup Guide for Raspberry Pi
    • GPS Data logger using a BerryGPS
    • Using python with a GPS receiver on a Raspberry Pi
    • Navigating with Navit on the Raspberry Pi
    • Using u-Center to connect to the GPS on a BerryGPS-IMU
    • Accessing GPS via I2C
    • BerryGPS-IMU FAQ
  • BerryGPS-GSM
    • BerryGPS-GSM Overview
    • Using GPS and Connecting via 3G/2G using PPP
    • Connecting via 3G/2G using the Hologram CLI
    • Real-time GPS tracking with a Raspberry Pi
    • Assisted GPS
    • How to access GPS NMEA sentences through USB on the BerryGPS-GSM
    • Using u-Center to connect to the GPS on BerryGPS-GSM
    • Using a button and the GPIO to send a SMS
    • Control the GPIO using a SMS from a mobile phone
  • PiScreen
    • PiScreen Quick Start Guide
    • PiScreen Driver Install Instructions
    • Enable Console on PiScreen
    • Enable X windows on PiScreen
    • PiScreen with stroke and Gesture Recognition
    • Virtual Keyboard for PiScreen
    • PiScreen Faq
    • PiScreen Kit Assembly Instructions
  • Raspberry Pi Robots
    • PiBBOT V2 – Balancing Robot using a Raspberry Pi
    • Success with a Balancing Robot using a Raspberry Pi
    • PiBBot – Robotic Project – Phase 2 – Prototype
  • TFTs on the Raspberry Pi
    • PiScreen - 3.5" TFT(480x320) with touch control for the Raspberry Pi - Kickstarter launched
    • Raspberry Pi with a 3.2" TFT with Touch control (Part 2)
    • Raspberry Pi with a 1.8" TFT shield
    • Raspberry Pi with a 2.2" TFT
    • Raspberry Pi, 1.8" TFT, RF Receiver and Temperature Sensor
    • Raspberry Pi and TFT Display
    • Controlling the GPIO on a Raspberry Pi with a Touchscreen
    • Programming for a Touchscreen on the Raspberry Pi

Follow OzzMaker via Email

Enter your email address to follow and receive notifications of new posts by email.

Join 359 other subscribers

Facebook Page

Facebook Page
Proudly powered by WordPress