Reply To: Piscreen2 on PI 3 B+ with Raspbian stretch not working

Home › Forums › Forums › Technical Support for PiScreen › Piscreen2 on PI 3 B+ with Raspbian stretch not working › Reply To: Piscreen2 on PI 3 B+ with Raspbian stretch not working

November 10, 2018 at 11:40 am #7617
r_morrell
Participant

Further update – on reading about how dtoverlays work

i did sudo vcdbg log msg

which showed it found the piscreen2 and loaded it.  (I also put dtdebug and boor again – which made this output very verbose

001363.757: brfs: File read: /mfs/sd/config.txt
001364.687: brfs: File read: 1622 bytes
001386.165: HDMI:EDID version 1.3, 1 extensions, screen size 48×27 cm
001386.272: HDMI:EDID features – videodef 0x80 !standby !suspend active off; colour encoding:RGB444|YCbCr422; sRGB is not default colourspace; preferred format is native; does not support GTF
001386.390: HDMI:EDID found preferred CEA detail timing format: 1920x1080p @ 60 Hz (16)
001386.472: HDMI:EDID found DMT format: code 4, 640x480p @ 60 Hz in established timing I/II
001386.556: HDMI:EDID found DMT format: code 5, 640x480p @ 72 Hz in established timing I/II
001386.632: HDMI:EDID found DMT format: code 6, 640x480p @ 75 Hz in established timing I/II
001386.717: HDMI:EDID found DMT format: code 8, 800x600p @ 56 Hz in established timing I/II
001386.796: HDMI:EDID found DMT format: code 9, 800x600p @ 60 Hz in established timing I/II
001386.880: HDMI:EDID found DMT format: code 10, 800x600p @ 72 Hz in established timing I/II
001386.956: HDMI:EDID found DMT format: code 11, 800x600p @ 75 Hz in established timing I/II
001387.033: HDMI:EDID found DMT format: code 16, 1024x768p @ 60 Hz in established timing I/II
001387.109: HDMI:EDID found DMT format: code 17, 1024x768p @ 70 Hz in established timing I/II
001387.195: HDMI:EDID found DMT format: code 18, 1024x768p @ 75 Hz in established timing I/II
001387.278: HDMI:EDID found DMT format: code 36, 1280x1024p @ 75 Hz in established timing I/II
001387.410: HDMI:EDID standard timings block x 8: 0x714F 81C0 8100 8180 9500 A9C0 B300 0101
001387.508: HDMI:EDID found DMT format: code 21, 1152x864p @ 75 Hz (4:3) in standard timing 0
001387.616: HDMI:EDID found DMT format: code 85, 1280x720p @ 60 Hz (16:9) in standard timing 1
001387.708: HDMI:EDID found DMT format: code 28, 1280x800p @ 60 Hz (16:10) in standard timing 2
001387.797: HDMI:EDID found DMT format: code 35, 1280x1024p @ 60 Hz (5:4) in standard timing 3
001387.895: HDMI:EDID found DMT format: code 47, 1440x900p @ 60 Hz (16:10) in standard timing 4
001387.996: HDMI:EDID found DMT format: code 83, 1600x900p @ 60 Hz (16:9) in standard timing 5
001388.086: HDMI:EDID found DMT format: code 58, 1680x1050p @ 60 Hz (16:10) in standard timing 6
001401.138: HDMI:EDID parsing v3 CEA extension 0
001401.215: HDMI:EDID monitor support – underscan IT formats:yes, basic audio:no, yuv444:yes, yuv422:yes, #native DTD:1
001401.304: HDMI:EDID found CEA detail timing format: 1280x720p @ 50 Hz (19)
001401.392: HDMI:EDID found CEA detail timing format: 720x576p @ 50 Hz (17)
001401.477: HDMI:EDID found CEA detail timing format: 720x480p @ 60 Hz (2)
001401.553: HDMI:EDID found CEA format: code 16, 1920x1080p @ 60Hz (native)
001401.625: HDMI:EDID found CEA format: code 4, 1280x720p @ 60Hz
001401.702: HDMI:EDID found CEA format: code 31, 1920x1080p @ 50Hz
001401.774: HDMI:EDID found CEA format: code 19, 1280x720p @ 50Hz
001401.849: HDMI:EDID found CEA format: code 18, 720x576p @ 50Hz
001401.924: HDMI:EDID found CEA format: code 3, 720x480p @ 60Hz
001401.978: HDMI:EDID found HDMI VSDB length 5
001402.040: HDMI:EDID HDMI VSDB has physical address 1.0.0.0
001402.095: HDMI:EDID HDMI VSDB has no extension fields
001402.175: HDMI:EDID filtering formats with pixel clock > 162 MHz or h. blanking > 1023
001402.431: HDMI:EDID preferred mode remained as CEA (16) 1920x1080p @ 60 Hz with pixel clock 148 MHz
001419.477: brfs: File read: /mfs/sd/config.txt
001420.278: HDMI:Setting property pixel encoding to Default
001420.342: HDMI:Setting property pixel clock type to PAL
001420.399: HDMI:Setting property content type flag to No data
001420.462: HDMI:Setting property fuzzy format match to enabled
001639.455: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
001640.772: hdmi: HDMI:>>>>>>>>>>>>>Rx sensed, reading EDID<<<<<<<<<<<<<
001652.870: hdmi: HDMI:EDID version 1.3, 1 extensions, screen size 48×27 cm
001652.977: hdmi: HDMI:EDID features – videodef 0x80 !standby !suspend active off; colour encoding:RGB444|YCbCr422; sRGB is not default colourspace; preferred format is native; does not support GTF
001653.101: hdmi: HDMI:EDID found preferred CEA detail timing format: 1920x1080p @ 60 Hz (16)
001653.184: hdmi: HDMI:EDID found DMT format: code 4, 640x480p @ 60 Hz in established timing I/II
001653.273: hdmi: HDMI:EDID found DMT format: code 5, 640x480p @ 72 Hz in established timing I/II
001653.356: hdmi: HDMI:EDID found DMT format: code 6, 640x480p @ 75 Hz in established timing I/II
001653.445: hdmi: HDMI:EDID found DMT format: code 8, 800x600p @ 56 Hz in established timing I/II
001653.524: hdmi: HDMI:EDID found DMT format: code 9, 800x600p @ 60 Hz in established timing I/II
001653.613: hdmi: HDMI:EDID found DMT format: code 10, 800x600p @ 72 Hz in established timing I/II
001653.696: hdmi: HDMI:EDID found DMT format: code 11, 800x600p @ 75 Hz in established timing I/II
001653.778: hdmi: HDMI:EDID found DMT format: code 16, 1024x768p @ 60 Hz in established timing I/II
001653.862: hdmi: HDMI:EDID found DMT format: code 17, 1024x768p @ 70 Hz in established timing I/II
001653.951: hdmi: HDMI:EDID found DMT format: code 18, 1024x768p @ 75 Hz in established timing I/II
001654.035: hdmi: HDMI:EDID found DMT format: code 36, 1280x1024p @ 75 Hz in established timing I/II
001654.171: hdmi: HDMI:EDID standard timings block x 8: 0x714F 81C0 8100 8180 9500 A9C0 B300 0101
001654.273: hdmi: HDMI:EDID found DMT format: code 21, 1152x864p @ 75 Hz (4:3) in standard timing 0
001654.387: hdmi: HDMI:EDID found DMT format: code 85, 1280x720p @ 60 Hz (16:9) in standard timing 1
001654.478: hdmi: HDMI:EDID found DMT format: code 28, 1280x800p @ 60 Hz (16:10) in standard timing 2
001654.571: hdmi: HDMI:EDID found DMT format: code 35, 1280x1024p @ 60 Hz (5:4) in standard timing 3
001654.673: hdmi: HDMI:EDID found DMT format: code 47, 1440x900p @ 60 Hz (16:10) in standard timing 4
001654.777: hdmi: HDMI:EDID found DMT format: code 83, 1600x900p @ 60 Hz (16:9) in standard timing 5
001654.874: hdmi: HDMI:EDID found DMT format: code 58, 1680x1050p @ 60 Hz (16:10) in standard timing 6
001667.928: hdmi: HDMI:EDID parsing v3 CEA extension 0
001668.007: hdmi: HDMI:EDID monitor support – underscan IT formats:yes, basic audio:no, yuv444:yes, yuv422:yes, #native DTD:1
001668.099: hdmi: HDMI:EDID found CEA detail timing format: 1280x720p @ 50 Hz (19)
001668.191: hdmi: HDMI:EDID found CEA detail timing format: 720x576p @ 50 Hz (17)
001668.281: hdmi: HDMI:EDID found CEA detail timing format: 720x480p @ 60 Hz (2)
001668.363: hdmi: HDMI:EDID found CEA format: code 16, 1920x1080p @ 60Hz (native)
001668.439: hdmi: HDMI:EDID found CEA format: code 4, 1280x720p @ 60Hz
001668.520: hdmi: HDMI:EDID found CEA format: code 31, 1920x1080p @ 50Hz
001668.595: hdmi: HDMI:EDID found CEA format: code 19, 1280x720p @ 50Hz
001668.675: hdmi: HDMI:EDID found CEA format: code 18, 720x576p @ 50Hz
001668.754: hdmi: HDMI:EDID found CEA format: code 3, 720x480p @ 60Hz
001668.814: hdmi: HDMI:EDID found HDMI VSDB length 5
001668.879: hdmi: HDMI:EDID HDMI VSDB has physical address 1.0.0.0
001668.935: hdmi: HDMI:EDID HDMI VSDB has no extension fields
001669.019: hdmi: HDMI:EDID filtering formats with pixel clock > 162 MHz or h. blanking > 1023
001669.279: hdmi: HDMI:EDID preferred mode remained as CEA (16) 1920x1080p @ 60 Hz with pixel clock 148 MHz
001669.351: hdmi: HDMI: hotplug attached with HDMI support
001669.424: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
001671.873: hdmi: HDMI: power_on to CEA mode 1080p60
001675.098: hdmi: HDMI: Action callback added to queue to happen at frame 2
001675.166: hdmi: HDMI: Action stop_3d_mode added to queue to happen at frame 2
001675.226: hdmi: HDMI: Action unmute added to queue to happen at frame 3
001675.296: hdmi: HDMI: Action cec_init added to queue to happen at frame 3
001726.105: *** Restart logging
001726.171: brfs: File read: 1622 bytes
001730.164: brfs: File read: /mfs/sd/cmdline.txt
001730.259: Read command line from file ‘cmdline.txt’:
001730.323: ‘dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=PARTUUID=3fa3f8fa-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait’
001730.643: brfs: File read: 142 bytes
002074.739: brfs: File read: /mfs/sd/kernel7.img
002074.801: Loading ‘kernel7.img’ to 0x8000 size 0x4b4d00
002079.195: No kernel trailer – assuming DT-capable
002079.283: brfs: File read: 4934912 bytes
002083.379: brfs: File read: /mfs/sd/bcm2710-rpi-3-b-plus.dtb
002083.444: Loading ‘bcm2710-rpi-3-b-plus.dtb’ to 0x4bcd00 size 0x63e6
002230.687: brfs: File read: 25574 bytes
002235.628: brfs: File read: /mfs/sd/config.txt
002236.177: dtparam: i2c_arm=on
002252.918: dtparam: spi=on
002267.517: dtparam: audio=on
002286.653: brfs: File read: 1622 bytes
002298.486: brfs: File read: /mfs/sd/overlays/piscreen2r.dtbo
002321.893: Loaded overlay ‘piscreen2r’
003565.384: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined
003683.004: Device tree loaded to 0x2eff9400 (size 0x6bb3)
003685.518: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
005135.922: vchiq_core: vchiq_init_state: slot_zero = 0xfad80000, is_master = 1
005140.954: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
005146.721: TV service:host side not connected, dropping notification 0x00000002, 0x00000001, 0x00000010

I also looked in the /boot/overlays directory and piscreen2r is there

I ran lsmod

which showed that fbtft was there but not piscreen2r (not sure it it shows overlays?)

Module Size Used by
fuse 110592 3
rfcomm 49152 4
bnep 20480 2
hci_uart 36864 1
btbcm 16384 1 hci_uart
serdev 20480 1 hci_uart
bluetooth 368640 29 hci_uart,bnep,btbcm,rfcomm
ecdh_generic 28672 1 bluetooth
joydev 20480 0
ads7846 20480 0
hwmon 16384 1 ads7846
fb_ili9486 16384 0
fbtft 45056 1 fb_ili9486
syscopyarea 16384 1 fbtft
sysfillrect 16384 1 fbtft
sysimgblt 16384 1 fbtft
fb_sys_fops 16384 1 fbtft
evdev 24576 8
brcmfmac 307200 0
brcmutil 16384 1 brcmfmac
cfg80211 573440 1 brcmfmac
snd_bcm2835 32768 1
rfkill 28672 6 bluetooth,cfg80211
snd_pcm 98304 1 snd_bcm2835
snd_timer 32768 1 snd_pcm
snd 69632 5 snd_timer,snd_bcm2835,snd_pcm
i2c_bcm2835 16384 0
spi_bcm2835 16384 0
uio_pdrv_genirq 16384 0
fixed 16384 0
uio 20480 1 uio_pdrv_genirq
i2c_dev 16384 0
ip_tables 24576 0
x_tables 32768 1 ip_tables
ipv6 425984 58

 

I boot the PI in console mode and nothing comes up

what does happen is I get /dev/fb1  with an LS that I did not before

crw-rw—- 1 root video 29, 0 Nov 10 13:18 /dev/fb0
crw-rw—- 1 root video 29, 1 Nov 10 13:18 /dev/fb1

I will go backand look at the piscreen doc to see if there is anything else to try

 

 

 

 

Blip, blop, bloop…