Home › Forums › Forums › Technical Support for BerryGPS and BerryGPS-IMU › Raspberry Pi 3 hangs after 5-7minutes with BerryGPS-IMUv3 › Reply To: Raspberry Pi 3 hangs after 5-7minutes with BerryGPS-IMUv3
Thanks for the response. I have tried a different USB cable with another power supply. I do have another RPi3 but it’s currently wired up for another project, may take me a day or so to disassemble it to try with the BerryGPS board. Also, I checked the components with my finger and none of them felt hot to me.
I did notice that I may have done a bad job soldering one of the pins on the female header – specifically PIN9 on the Pi. From what I can tell that’s GND which is also on PIN6 and that joint seems to be ok so not sure if this has anything to do with my problem. I will try to re-solder the joint later today and report back.
- This reply was modified 3 years, 8 months ago by Jerry G.