Automatic reset of BerryGPS-GSM

Home Forums Forums Technical Support for BerryGPS-GSM Automatic reset of BerryGPS-GSM

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #16614
    david96at
    Participant

    Estaba usando la placa sin problemas por 2 semanas con la raspberry pi zero con el operador Claro en Perú, después empezó a resetear sin razón aparente y a veces llegó a apagarse.
    Necesito saber como solucionar este problema.

    I was using the board without problems for 2 weeks with the raspberry pi zero with the Claro operator in Peru, then it started to reset for no apparent reason and sometimes it turned off. I need to know how to solve this problem.

    #16619
    Mark Williams
    Keymaster

    Do you see any errors in /var/log/syslog ?

    You can also connect to one of the virtual com ports on the GSM and monitor it to see what it shows when it disconnects minicom -b 115200 -o -D /dev/ttyACM0 

    Mark --OzzMaker.com --

    #16623
    david96at
    Participant

    Here I attach the results. I have noticed that it reboots every 2.2 minutes aprox.

    #16627
    david96at
    Participant

    You can send me the email of the company to communicate with me.

    #16628
    Mark Williams
    Keymaster

    Contact sales @ ozzmaker.com

    Mark --OzzMaker.com --

    #16645
    richardp
    Participant

    Your GSM module is doing a hard reset. Is your power supply +2 Amps? have you tried with a different USB cable?

    Can you do the minicom test again, and when you first connect to the GSM module, enable verbose error logging with;AT+CMEE=2

    Richard --OzzMaker.com --

    #16646
    david96at
    Participant

    These are the results.

    #16648
    richardp
    Participant

    Okay, nothing new there. what about your power supply? is it 2 Amps or higher? have you tried a different USB cable?

    Richard --OzzMaker.com --

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.

Blip, blop, bloop…