Can not save calibration data

Home Forums Forums Technical Support for PiScreen Can not save calibration data

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #7202
    Bengt
    Participant

    pi@raspberrypi:~ $
    sudo /home/pi/xinput_calibrator/scripts/xinput_calibrator_pointercal.sh
    ERROR: XorgPrint Calibrator does not support the supplied –output-type
    Error: unable to apply or save configuration values
    pi@raspberrypi:~ $

    There must be something very wrong in scripts if save is not possible.

    Any ideas what is wrong or missing?

    Cheers
    Bengt

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.

Blip, blop, bloop…