Connecting BerryIMU-v2 to a PC via USBHome › Forums › Forums › Technical Support for BerryIMU › Connecting BerryIMU-v2 to a PC via USBTagged: USB PC BerryIMU-v2 connectThis topic has 1 reply, 2 voices, and was last updated 4 years, 9 months ago by Mark Williams.Viewing 2 posts - 1 through 2 (of 2 total)AuthorPosts December 9, 2018 at 9:18 am #7698 TWParticipantHey,I want to connect a BerryIMU-v2 directly to a PC via USB. And I was wondering if I can use a USB-to-serial cable to interact with the BerryIMU-v2 in the same way that a Raspberry Pi would interact the IMU? (I.e., read data and calibrate the sensor). December 10, 2018 at 3:01 pm #7699 Mark WilliamsKeymasterThe BerryIMU uses i2c to communicate with a MCU (RaspberryPi).You will most likely not be able to connect it to a PCMark --OzzMaker.com -- AuthorPostsViewing 2 posts - 1 through 2 (of 2 total)You must be logged in to reply to this topic.Log In Username: Password: Keep me signed in Log In