External GPS LED signal on solid case

Home › Forums › Forums › Technical Support for BerryGPS and BerryGPS-IMU › External GPS LED signal on solid case

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 20, 2020 at 7:09 pm #16093
    pitickler
    Participant

    Hi!

    I’d like to put the Pi Zero and GPS-IMU v3 in a plastic case, and have an LED on the outside to show GPS connectivity (replicate the 1 second LED flash on the board itself, or a solid LED, either way)

    Do I do this with the T_PULSE pin?  If so can you advise how?  E.g. do I wire the negative side of the LED to the T_PULSE to ground it?

    Thanks in advance

    August 20, 2020 at 7:59 pm #16094
    Mark Williams
    Keymaster

    Hi, you would use the T_PULSE pin,  and connect the positive side of the LED to this pin.

    Mark --OzzMaker.com --

    August 20, 2020 at 11:15 pm #16097
    pitickler
    Participant

    Perfect thank you, I’ll give this a go!

    August 22, 2020 at 10:17 am #16104
    pitickler
    Participant

    LED working perfectly thanks

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.

Blip, blop, bloop…