Hardware reference guide

[nite_shift]

Hi, Is there a hardware data sheet for the GPS/IMU V3? I am evaluating before purchase, so I dont have a physical one in my hands. A readable schematic diagram would satisfy my requirement. I have found the schematic on git hub under hardware, but it is unclear where the connectors on the physical berry map to the schematic. for example the berry has an unused 2×4 footprint labelled 3.3V,5V SDA,SCL,RXGPS,GPIO4,TXGPS. where are these on the schematic?

[Mark Williams]

The datasheets can be found on the product page in the “download” tab.
The 2×4 pins are connected to the Raspberry Pi GPIO

<a href=”https://ozzmaker.com/wp-content/uploads/2016/08/CAM-M8-FW3_DataSheet_UBX-15031574.pdf”>https://ozzmaker.com/wp-content/uploads/2016/08/CAM-M8-FW3_DataSheet_UBX-15031574.pdf</a&gt;
<a href=”https://ozzmaker.com/wp-content/uploads/2017/11/LSM9DS1.pdf”>https://ozzmaker.com/wp-content/uploads/2017/11/LSM9DS1.pdf</a&gt;
<a href=”https://ozzmaker.com/wp-content/uploads/2020/02/BMP388-ds001.pdf”>https://ozzmaker.com/wp-content/uploads/2020/02/BMP388-ds001.pdf</a&gt;

&nbsp;

 

Schematic
https://ozzmaker.com/wp-content/uploads/2020/10/BerryGPS-IMU-3.5.png

 

 

Mark --OzzMaker.com --

[Author]

Posts