NMEA sentence update rate to 18Hz

Home Forums Forums Technical Support for BerryGPS and BerryGPS-IMU NMEA sentence update rate to 18Hz

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #17825
    davide
    Participant

    Hi everyone,

    I have no previous experience in GPS sensors and the UBX protocol, but following the guide in the FAQ, I managed to set the NMEA sentence update rate of my BerryGPS-IMU v4 up to 10Hz. I would like to set it to 18Hz, how can I do it?

    Thanks in advance for your help.

    Davide

    #17826
    Mark Williams
    Keymaster

    Hi Davide
    Its best to us U-center to configure this;

    https://ozzmaker.com/using-u-center-to-connect-to-a-raspberry-pi-with-an-attached-berrygps-imu-gsm/

    You would also need to disable unneeded GNSS. E.g. just have GPS enabled

     

    Mark --OzzMaker.com --

    #17835
    davide
    Participant

    Hello Mark,

    unfortunately in my case I cannot rely on some external software, but since it is possible to get hex dumps of the messages, I think I will manage to find a solution.

    Thanks a lot!

    Davide

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Blip, blop, bloop…