No SIM detected

Home Forums Forums Technical Support for BerryGPS-GSM No SIM detected

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #15849
    bjoern
    Participant

    I tried to get started with my Berry GPS-GSM. It came with a hologram SIM that I use.

    When I try commands like

    AT+CGDCONT=1,"IP","hologram"

    or

    AT+CCID?

    I always get

    +CME ERROR: SIM not inserted

     

    The command

    AT+CIND?

    returns the following line:

    +CIND: 5,3,0,0,0,0,0,0,1,0,0,0

    It looks like the SIM is not detected by the module.

    I have already tried another SIM that works in my phone, but I got the same result.

    Is there anything I can try to get it working?

    #15850
    Mark Williams
    Keymaster

    Hi, can you please upload a close up photo of the SIM holder on the PCB

    Mark --OzzMaker.com --

    #15851
    bjoern
    Participant

    Thanks for the fast reply. Here is the photo.

    #15853
    Mark Williams
    Keymaster

    can you please contact sales <@> ozzmaker.com

    Mark --OzzMaker.com --

    #16682
    ulisse1005
    Participant

    Hi,

    I have the same issue with my boards.

    I can confirm that it’s not a board issues, since I tested on 8 different ones. Sometimes, in random occasions after boot AT+CPIN? returns READY.

    But on 99% of the cases I receive +CME ERROR: SIM not inserted.

    AT+CIND?

    returns the following:

    +CIND: 5,3,0,0,0,0,0,0,1,0,0,0

    Can you provide some assistance please? I have 20 GPS+GPRS boards from you, and I can’t get them out into production.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

Blip, blop, bloop…