[Resolved] Pi-Screen Not Working

Home › Forums › Forums › Technical Support for PiScreen › [Resolved] Pi-Screen Not Working

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 16, 2014 at 1:04 am #2775
    Boomer
    Participant

    Mark,

    Hopefully this is a better place to get some help. As I noted in my Kickstarter comments, I can’t get any of the calibration tools to work even after doing a clean install with no USB devices attached. Is it possible my screen is defective?

    Thanks,

    Jack

    October 16, 2014 at 3:09 pm #2779
    Mark Williams
    Keymaster

    Hi Jack.

    Can you please show me the output of these three commands;
    ls -l /dev/input/
    cat /proc/bus/input/devices
    cat /etc/modules

    Mark --OzzMaker.com --

    October 19, 2014 at 6:40 pm #2813
    Mark Williams
    Keymaster

    [Resolved] Faulty hardware

    Mark --OzzMaker.com --

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Blip, blop, bloop…