[Resolved]Using PiScreen with a DAC on B+ -is it possible?

Home Forums Forums Technical Support for PiScreen [Resolved]Using PiScreen with a DAC on B+ -is it possible?

Tagged: , ,

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #2836
    matt_0222
    Participant

    I’m looking to create a mini media centre with the PiScreen and a DAC such as IQaudIO (http://iqaudio.com/?page_id=454). However I’m not sure if I can use both at the same time as they both rely on the GPIO pins. Is there overlap with actual pin usage (which might be solvable with careful soldering) between the DAC and PiScreen or are there other DAC/screen combinations that I should be considering?

    Thanks in advance!

    #2837
    Mark Williams
    Keymaster

    These are the pins used by PiScreen;

    • Pin1 3.3v
    • Pin6 GND
    • Pin11 GPIO 0
    • Pin15 GPIO 3
    • Pin18 GPIO 5
    • Pin19 MOSI
    • Ping21 MISO
    • Ping23 SPI_CLOCK
    • Ping24 SPI_CE0
    • Ping26 SPI_CE1

    Mark --OzzMaker.com --

    #2841
    matt_0222
    Participant

    Thanks Mark – really helpful. When I find out the pins used for the DAC I’ll post back here for reference.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Blip, blop, bloop…