Vibration limits with IMU

Home Forums Forums Technical Support for BerryIMU Vibration limits with IMU

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #7964

    Looking at building an Electric Spirit Level, mounting the IMU on a device that produces a lot of vibration (Petrol Powered Star Picket Driver), using a cable to connect/disconnect PI unit (or clip PI unit to cap so I can see when driver is level

    Will the IMU give reasonable readings if being vibrated a lot ?

    Mark Williams

    The IMU would pick up the vibrations as noise.   You can easily filter this out using a low pass filter.

    some code example here;

    Mark --


    Thanks Mark, will be putting in order shortly 🙂


Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Blip, blop, bloop…