Warm/Hot/Cold Start

Home › Forums › Forums › Technical Support for BerryGPS and BerryGPS-IMU › Warm/Hot/Cold Start

Tagged: ,

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 6, 2020 at 12:46 am #14450
    sri
    Participant

    Hi Berry people

    I am wondering if there is a way to identify if the Berry Module is doing a Hot/Warm or Cold Start. I am using gpsd along with cgps/gpsmon to identify. I was wondering if this could be automated based on the data stored in the RAM when the Berry Module starts. I want to identify the cold, hot, warm start status from my python code.

     

     

    February 6, 2020 at 1:14 am #14452
    sri
    Participant

    On a related note, can I set the ublox chip to Cold/Warm/Hot start from u-center?

     

    February 6, 2020 at 1:27 am #14453
    sri
    Participant

    So I figured from your website the answers to my questions. Sorry for the trouble.

    For future reference for others : https://ozzmaker.com/using-u-center-to-connect-to-a-raspberry-pi-with-an-attached-berrygps-imu-gsm/

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Blip, blop, bloop…