[musch711]

Hi Mark,

Thanks for the follow up with code sample!  I enabled i2c and was able to get some readings from it; however, given what you mentioned about additional soldering for GPS, I'm currently limited to the accelerometer.  I used the following code: https://github.com/ozzmaker/BerryIMU/blob/master/python-BerryIMU-gryo-accel-compass/berryIMU-simple.py to get the reading.

Thank you for your help and I'll follow up if I have additional questions!

-Steven

[musch711]

Hi Mark,

I thought according to this, the QWIIC connector could serve as an alternative instead of mounting the IMU directly on top and soldering the connection.  Is that not accurate?

Thanks,

Steven

[Author]

Posts