Description
Product Description
Power your OzzMaker RGB LED matrix and Raspberry Pi from a single 3.7V LiPo or Li-Ion battery. An onboard buck-boost converter (TPS63020) delivers a steady 5V, and an integrated MCP73871 charger lets you recharge the battery in place.
We have also broken out unused pins and included a QWIIC connector so you can easily access the I2C pins.
Included in this purchase
- 1x Raspberry Pi LED connector with LiPo/Li-Ion support
Specifications
- Dimensions: 30mm x 50mm / 1.1in x 1.9in
- Weight: 10g / 0.25oz
- Connection: FFC, 5V and GND pads, QWIIC
- Compatibility: Pi 3, Pi 4, Pi Zero and Pi Zero 2
- Battery charge rate: 1A
- Charge Connector: Micro B USB
- Battery connector: 2pin JST
- Other: Unused pins broken out
⚠️ Important: Removing the battery
When disconnecting the battery from the JST connector, use a pair of pliers to gently grip the plastic JST housing on the battery cable and pull it straight out. Avoid pulling on the wires — this can damage the cable or pull the wires out of the connector. JST connectors fit tightly by design, so a firm, controlled pull on the housing is normal and safe.
Below are some example projects
5 Panels in a cross formation
Below is an example of 5 panels set up in a cross formation using the LED LiPo/Li-Ion connector for Raspberry Pi.
2 Panels using Raspberry Pi connector which supports a LiPo/Li-Ion battery
Here is an example of 2 panels using the LED LiPo/Li-Ion connector for Raspberry Pi.
1 RGB LED Matrix using the Raspberry Pi connector which supports a LiPo/Li-Ion battery
Raspberry Pi, battery and LED panels not included
